Appliance Repair J&M

000

Article

Commercial Range Pilot Won't Stay Lit? Here's What's Usually Wrong

June 12, 2026 Jose Miguel Sanchez
Back to Blog

On a commercial range, oven, or fryer, the pilot isn't just a flame. It heats a thermocouple or thermopile that tells the gas safety valve it's safe to stay open. When that signal drops, the valve closes and the pilot goes out.

The most common cause is a worn or dirty thermocouple. Grease and heat take their toll, and a thermocouple that produces a weak signal will hold the pilot for a while, then drop it in the middle of service.

Next is a dirty or partially blocked pilot orifice, which gives a weak, lazy flame that doesn't wrap the thermocouple properly. Kitchens with heavy grease see this often.

The third is the safety valve itself. If a new thermocouple and a clean pilot don't solve it, the valve may be failing. Because these are gas safety components, this is a repair to leave to a technician, and every safety control should be tested before the equipment goes back into use.

Equipment not cooling like it used to?

Call Appliance Repair J&M, Monday to Saturday, 8 AM to 7 PM.

Call Now
Appliance Repair J&M

Appliance Repair J&M is a Brooklyn-based repair service run by technician Jose Miguel Sanchez. Refrigeration, walk-in coolers, ice machines, air conditioning, and commercial kitchen equipment, installed, repaired, and maintained across NYC, Long Island, Westchester, and North Jersey.

No diagnostic fee when you call us back after your first visit

Contact

Serving Brooklyn, NYC, Long Island & North Jersey

Hours

  • Monday – Saturday
  • Sunday: Closed
  • 8:00 AM – 7:00 PM

Licensed & Insured

© 2026 Appliance Repair J&M. All rights reserved.

Installation · Repair · Prevention