New York water carries minerals, and every freeze cycle leaves a little of them behind on the evaporator plate. Over months that scale builds up, the ice releases slowly or unevenly, and the machine starts producing small, hollow, or cloudy cubes.
The fix is usually a proper cleaning and descaling, not a new part. That means running the machine's cleaning cycle with the correct manufacturer-approved cleaner, then sanitizing the water system and the bin.
If cleaning doesn't bring production back, the next things to check are the water inlet valve, the water pump, the float or water level sensor, and the condenser coil. A dirty condenser on an air-cooled machine slows every freeze cycle.
For most restaurants and bars, a cleaning every six months is a good baseline; heavy-use machines or hard-water locations may need it more often. It's far cheaper than an emergency call in the middle of a summer weekend.
